13

2020

-

03

MIM products usually have the following characteristics

Author:



Thin-type
The most suitable wall thickness for MIM is no more than 6mm. Thicker outer wall is acceptable, but the cost will be increased due to the longer processing time and extra material used. In addition, ultra thin wall which less than 0.5mm is still possible to make, however, it requires strictly high standard for design.
 
Yield
MIM is a technology with better elasticity, it can be economically achieved to produce thousands output to even millions. Similar to casting and injection parts, customers need to invest molds and fixtures for MIM. Therefore, cost estimates will be affected for small batches.
 
Raw material
MIM technology can handle a variety of materials, including iron alloy, super alloy, titanium alloy, copper alloy, fire proof metal, hard alloy, ceramic and metal matrix composite materials. Although nonferrous aluminum and copper are feasible from technology perspective, usually people choose more economic way to handle, such as casting or machining.
 
Assistance
Gian provides comprehensive services to maximize the value of MIM production. We not only help you to upgrade existing products in terms of design and material selection, but also assist you to complete a full product development. It includes but not limited to product design, technical analysis, rapid prototyping and laser scanning.

13

2020-03

MIM products usually have the following characteristics

The most suitable wall thickness for MIM is no more than 6mm. Thicker outer wall is acceptable, but the cost will be increased due to the longer processing time and extra material used. In addition, u

20

2020-01

What is the density and strength of MIM products?

The density of a typical MIM is theoretically higher than 98%. Specific density characteristics depend on the choice of material, but it is very close to precision materials.

20

2020-01

19

2018-06

Metal injection molding technology in detail

Metal injection molding (referred to as MIM) is a technology combining powder metallurgy and injection molding, which breaks through the traditional powder metallurgy product shape and strength limitations, also breaks through the strength limitations of die casting, breaks through the material flow restrictions of stamping molds, and breaks through precision. Mass production restrictions for casting and high cost constraints for turned parts.

19

2018-06

The market competition pattern of 3D printed metal powder may change

The market competition pattern of 3D printing metal powder will change as more companies enter or increase their production and R & D efforts in the field of metal powder. In 2016, GKN, Oerlikon and Alcoa made active strategic plans.

09

2017-09

Rich variety of raw materials, and the variety of domestic powder metallurgy products has been expanded

In terms of raw materials, at present, the main raw materials of powder metallurgy in China are not only reduced iron powder, electrolytic copper powder, etc., and domestic production of atomized iron powder, stainless steel powder, high-speed steel powder, coated powder and various element metal MIM powder, Ceramic powders can basically meet the needs of domestic production of high-strength parts, and can also produce raw material powders for special purposes, which greatly expands the variety of powder metallurgy products, but there is still a large gap in quality and variety from abroad.

Huizhou Yonglixing Industrial Co., Ltd.

Address: Laohuling Industrial Park, Xiaojinkou Town, Huicheng District, Huizhou City, Guangdong Province
Telephone: 86-752-7823176
Mobile: 86-138 2998 5513
Fax: 86-752-7823172
E-Mail: martin@wotta.net

 

【日本·兵庫】
 (株)ジョイトジャパン JOITO JAPAN CO.,LTD.
 ADD: 兵庫県神戸市中央区磯部通-1-20
 TEL: 81-050-6865-5905


Copyright©Huizhou Yonglixing Industrial Co., Ltd. All Rights Reserved